23 Feb Baler Start Up and Training
Welcome back to the Ely Enterprise Blog!
Ever wonder what it takes to get your baler up and running? Ely Enterprises has a comprised checklist of over 30 start up items that need to be checked off before we leave our customers site. That includes start up and training for our compactors all the way up thru our two ram and metal balers.
Here are a few examples of what our service techs check off on the list (and provide the customer with a copy) when installing a two ram baler:
- ____ MANUAL MODE MOVE BALE DOOR CLOSE AND OPEN , INSURE LASER READING CORRECTLY (MAKE SURE EJECTOR RAM FULLY RETRACTED) CHECK DOOR SAFETY SWITCH IS WORKING CORRECTLY
- ____ MANUAL MODE RUN MAIN RAM FORWARD AND DEPRESS POSITION FOR EJECTION BUTTON AND CHECK CLEARANCE FOR EJECTOR RAM (3/4 TO 1” FROM KEYWAY)
- ____ INSTALL STRAPPER WIRE ESCAPEMENT AND BALE TABLE (ALLOW 6” BETWEEN BALE TABLE EDGE AND LIP OF EJECTION OPENING)
- ____ RUN STRAPPER TO CHECK FOR NORMAL OPERATION (THROW A FEW STRAPS)
When you are installing and test running the equipment, its important to make sure the customer knows whats going on and the techs have a set process and procedures on every installation. With over 35 years of experience , Ely Enterprises specializes in completing turn key recycling equipment installations.
Thanks for reading-check back next Tuesday for our weekly blog updates!
Any questions or concerns? Please contact info@elyent.com or visit our website at www.elyrecyclingequipment.com. You can also call 1-888-8-BALERS for any other information.
