Baling Wire

We carry a complete selection of baling wire that ranges from standard bale ties for your vertical, all the way up to a coil of baling wire for your two-ram baler. With bale wire in stock we are able to ship most baling wire same day.

Finding the right baling wire for you

  1. Find out the length of wire you require by measuring the distance the wire will go around the bale. You should be able to find this distance on the specification sheet for your baler.
  2. Find the proper gauge by the material you are baling. If your material has a lot of memory (the amount the material springs back) than you will require a heavier gauge baling wire.
  3. Know the type of baling wire your baler requires. If you are using a vertical baler or closed door horizontal you will need bale ties in the required length and gauge. If you are using an auto-tie horizontal baler or two-ram baler, you will need either box or coiled wire.
  4. If you require help with your decision, please do not hesitate to call our inside sales staff at 888-8-BALERS (225977) or email at sales@elyent.com.

Baling wire we carry includes:

Single Loop Bale Ties – Lengths between 10-22 Feet / Gauges Between 11-14 Available in Galvanized, Black Annealed or KleenGreen

100# Boxes of Auto-Tie Baling Wire – Available in 10-12 Gauges (Black Annealed or Galvanized)

Coil Wire for Two Ram Balers Available in 11 & 12 Gauges

Additional Baling Wire Items:

We are happy to help make operating your baler easier.  We offer a couple of items that can help you with baler operation.

box wire 1 Baling wire Galv HT

If you are interested in Baling Wire,
please contact our sales staff at
888-8-BALERS (22-5377),
or email at sales@elyent.com.